Create the drawing shown above as far a necessary to answer the questions below.

Set-up:
1. Using the "UNITS" command set units to Decimal units with 3 decimal place accuracy.
Set the Limits to 36.0,24.0 for this drawing.
2. Begin your drawing with the 4.000 unit diameter circle at absolute coordinate 16.000,13.000
3. The three sides of each tab are composed of an arc and parallel lines 1.000 unit apart.

QUESTIONS!

1. The distance from the center of the 2.000 radius arc "B" to the center of
the 2.00 radius arc "C" is

A: 10.286
B: 10.293
C: 11.300
D: 11.307
E: 11.314

2. The absolute coordinate value of the center of arc "C" is

A: 21.657,18.657
B: 21.657,18.664
C: 21.657,18.671
D: 21.657,18.685
E: None of the above

3. The angle formed in the X-Y plane from the center of the 2.000 radius arc "C"
to the center of the 2.125 diameter hole "D" is

A: 242
B: 210
C: 175
D: 136
E: 118

4. The total length of arc "E" is

A: 3.766
B: 3.772
C: 3.778
D: 3.784
E: 3.790

5. The Total area of Plate2 with all the holes including the keyway removed is

A: 232.259
B: 232.265
C: 232.271
D: 232.277
E: 232.283