Create the drawing shown above as far a necessary to answer the questions below.

Set-up:
1. Using the "UNITS" command set units to Decimal units with 4 decimal place accuracy.
Set the Limits to 11,8.5 for this drawing.
2. Begin your drawing with the 1.000 unit diameter circle at absolute coordinate 2.2500,4.0000

QUESTIONS!

1. The distance from the center of the 1.0000 radius arc "A" to the intersection of the
circle and center line at "B" is closest to

A: 6.8456
B: 6.8462
C: 6.8474
D: 6.8480
E: 6.8486

2. The absolute coordinate value of the center of the 4.5000 radius arc "C" is

A: 4.8944,-0.8226
B: 4.8844,-0.8226
C: 4.8950,-0.8232
D: 4.8956,-0.8238
E: 4.8962,-0.8962

3. The total length of arc "C" is

A: 5.3583
B: 5.3589
C: 5.3595
D: 5.3601
E: 5.3607

4. The total area of the Lever drawing with the inner irregular shape and both holes removed is

A: 17.6813
B: 17.6819
C: 17.6825
D: 17.6831
E: 17.6837

5. The angle formed in the X-Y plane from the quadrant of arc "D" to the center of the 1.5000 circle is

A: 315 degrees
B: 259 degrees
C: 201 degrees
D: 135 degrees
E: 61 degrees